-
Qaybaha Qalliinka HSS ee Duubka leh ee Titanium-ka ah ee loogu talagalay Qaxitaanka Degdegga ah ee Chip-ka iyo Qoditaanka Godka Qoto dheer
Faahfaahinta
Qalabka: HSS-M2 / HSS-M35 (5% Cobalt) / HSS 4341
Naqshadeynta Fuulista: Parabolic
Dahaarka: TiN (Titanium Nitride) - Dahab
Wax-soo-saarka: Si Buuxda Loogu Dhul-daadiyay
Xagasha Barta: 118° / 135° Barta Kala Qaybsan
Dhexroorka Jarida: 3mm – 13mm (Metric) / Cabbirrada Imperial-ka ah ee la heli karo
Nooca Shank: Shank Toosan / Shank Saddex-Flat / Shank Hex
Baakadaha: Sanduuqa Balaastikada ah (Baakad Hal Cabbir ah / Qalab / Baakad OEM ah ayaa diyaar ah)
Codsiga: Qoditaanka godka qoto dheer iyo qodista joogtada ah ee birta, birta la shubay, iyo biraha aan birta ahayn halkaas oo qaab-dhismeedka biibiilaha caadiga ah uu keeno xidhitaanka jajabka ama ururinta kulaylka -
Qoryaha Auger Bit, 6–30mm | Qodista Barta Qoto dheer ee Qoryaha oo Is-quudinaysa
Faahfaahinta
Nooca Badeecada: Qayb alwaax ah oo lagu shubo / qayb qodis ah oo caajis ah oo alwaax ah
Qalabka: Bir Kaarboon
Naqshadda Bit: Naqshad hal-flute ah oo leh bar boolal isku-dhafan oo isku-dhafan iyo kor u qaadis goyn dibadda ah
Nooca Shank: Hex Shank, Wareega Shank
Jihada Jarida: Jarida gacanta midig
Dhexroorka La Heli Karo: 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 25 / 26 / 28 / 30 mm
Dhererka La Heli Karo: 230 mm / 450 mm / 600 mm / Dhererka gaarka ah ayaa la heli karaa
Dhammaadka Dusha Sare: Dhammaadka la safeeyey
Iswaafajinta Qalabka: Dhoolatusyada korontada, darawallada qodista aan fiilada lahayn iyo dhoolatusyada wareega oo leh weelal iswaafajin kara
Codsiyada lagu taliyay: Loogu talagalay qodista godka qoto dheer ee degdega ah: Alwaax jilicsan, Alwaax adag, Alwaax, Alwaax alwaax ah, Plywood, MDF
Baakad: Bacda PVC, Tuubo Balaastig ah, Kaarka Nabarrada ama Baakadaha OEM/Summada Gaarka ah -
5 xabbo oo Titanium ah oo lagu dahaadhay HSS-M2 Hex Shank Bit, 2.5–5.0mm | Qaybaha Qoditaanka Metric-Bedel Degdeg ah oo ku jira Xirmada Buufinta
Faahfaahinta:
Nooca Badeecada: Qalabka qodista shank-rogidda ee mitirka ah ee hex
Qalabka: Birta xawaaraha sare leh ee HSS-M2
Nooca Shank: Shank hex ah oo degdeg ah oo isbeddel degdeg ah
Dahaarka: Titanium nitride (TiN), dhammaystir dahab ah
Qaabeynta Qalabka: Xirmo sawiran — 5 xabbo: 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm; qalab kale oo la heli karo — 5 xabbo: 2 / 3 / 4 / 5 / 6 mm; 6 xabbo: 2 / 3 / 4 / 5 / 6 / 8 mm; 5 xabbo: 4 / 5 / 6 / 8 / 10 mm; 12 xabbo: 2 / 2.5 / 3 / 3.2 / 3.5 / 4 / 4.5 / 4.8 / 5 / 5.5 / 6 / 6.5 mm
Iswaafajinta Qalabka: Dareeraha korontada, darawallada qodista aan fiilada lahayn, kaashawiitooyinka iyo darawallada saamaynta leh oo leh chuck hex-shank ah ama bit holder oo la jaan qaadi kara
Baakad: Baakad fiilo ah oo cad oo laalaada; Baakad OEM/sumadda gaarka ah ayaa la heli karaa
Codsiyada lagu taliyay: Qodista wareegga guud ee loogu talagalay birta khafiifka ah, aluminiumka, biraha kale ee aan caadiga ahayn ee aan birta ahayn, alwaax iyo balaastig -
Qaybaha Qodista Hex Shank ee Titanium-ka ah (HSS-M2 / HSS-M35 Cobalt) | 135° Barta Kala Qaybsan, Isbeddel Degdeg ah oo loogu talagalay Qodista, Kareemayaasha & Darawalada Saamaynta
Faahfaahinta:
Qalabka: HSS-M2 / HSS-M35 (Cobalt)
Wax-soo-saarka: Si Buuxda Loogu Dhul-daadiyay
Xagasha Barta: 135° Barta Kala Qaybsan / 118°
Dhexroorka Jarida: 1mm - 13mm (Metric)
Nooca Shank: Hex Shank — Isbeddel Degdeg ah, oo la jaan qaadaya layliyada korontada, kaashawiitooyinka aan fiilada lahayn, iyo darawallada saamaynta
Dahaarka: Titanium Nitride (TiN)
Baakad: Hal Cabbir / Qalab / Baakad OEM ah ayaa la heli karaa
Adeegsiga: Qoditaanka walxaha aan la taaban karin iyo kuwa aan la taaban karin ee ku jira wax soo saarka birta, MRO, dhismaha, iyo adeegga goobta - shafka hex wuxuu u oggolaanayaa isbeddello aan qalab lahayn oo ku yimaada darawallada qodista, kaashawiitooyinka, iyo darawallada saamaynta leh, dahaarka titanium nitride-na wuxuu ku daraa adkaanta dusha sare wuxuuna yareeyaa isku dhaca inta lagu jiro jarista. -
Qaybaha Qodista Jabka ee Cobalt-ka (HSS-Co 5%) | DIN 338 130° Barta Birta Aan Dheeraysanayn & INOX
Faahfaahinta:
Qalabka: HSS 4341 / HSS-M2 / HSS-M35 (Cobalt)
Wax-soo-saarka: Si Buuxda Loogu Dhul-daadiyay
Xagasha Barta: 130° oo leh Jabiyaha Jabka
Dhexroorka Jarida: 1mm - 13mm (Metric)
Nooca Shank: Shank Toosan (Ø1mm – 4.9mm) / Shank Saddex-Flat ah (Ø5mm iyo wixii ka sareeya)
Dhammaad: Iftiin / Amber / Oxide Madow / Madow & Amber
Baakad: Hal Cabbir / Qalab / Baakad OEM ah ayaa la heli karaa
Codsiga: Qodista birta aan miridhku lahayn, xaashida/saxanka INOX, iyo agab kale oo adag ama ductile ah oo ku jira wax soo saarka birta, shaqada birta xaashida ah, baabuurta, iyo codsiyada warshadaha guud - naqshadeynta jajabka jajabka 130° wuxuu yareeyaa sameynta jajabka dheer, ee adag wuxuuna hagaajiyaa daadgureynta jajabka inta lagu jiro qodista joogtada ah. -
Qaybaha Qalliinka Gacanta Bidix ee HSS - Helix-ka gadaal, 1–13mm / 1/16″–1/2″, oo loogu talagalay Soo saarista Bolt-ka Jaban iyo Stud-ka
Faahfaahinta:
Qalabka: HSS (Birta Xawaaraha Sare, heer kala duwan ayaa la heli karaa)
Jihada Helix: Bidix-Gacan (Kor-ka-leexasho / Dib-u-celin)
Wax-soo-saarka: Si Buuxda Loogu Dhul-daadiyay
Xagasha Barta: 118° / 135° Barta Kala Qaybsan
Dhexroorka Jarida: 1mm - 13mm (Metric), 1/16″ - 1/2″ (Imperial)
Nooca Shank: Shank Toosan / 1/4″ Shank Hex
Dhammaad: Iftiin leh (Aan dahaar lahayn) / Midab Amber / Oxide Madow / Kale
Baakad: Hal Cabbir / Qalab / Baakad OEM ah ayaa la heli karaa
Codsiga: Soo saarista boolal jaban, ka saarista roogagga la qabtay, qodista kahor-soo-saareyaasha ee codsiyada baabuurta, warshadaha, iyo MRO -
Qaybaha Qodista Alxanka HSS-Co M35 ee Spot - Barta Dhexe, 6/8/10mm, ee loogu talagalay Dayactirka Jirka Gawaarida iyo Kala-soocidda Guddiyada
Faahfaahinta:
Qalabka: HSS-Co M35 (5% Cobalt)
Barta Dhexe: Haa (talo tijaabo ah oo is-barbardhigaysa)
Dhexroorka Jarida: 6mm / 8mm / 10mm
Wax-soo-saarka: 100% Dusha Dhulka oo Dhan
Dhammaadka: Iftiin (Aan dahaar lahayn) / Midab Amber / Oxide Madow
Nooca Shank: Shank Toosan
Codsiga: Ka saarista alxanka meelaha lagu dhejiyo ee muraayadaha jirka baabuurta; ku habboon maqaarka albaabka, dahaarka, muraayadaha rookaha, iyo muraayadaha dambe iyada oo aan la gelin xaashida hoose -
Qalabka Qodista HSS ee 230-Xabsi (1-13mm) – Kaydinta Birta Buluugga ah ee Shaqada Culus leh
Faahfaahinta:
Heerka: DIN 338 (Heerka Metric)
Qalabka: HSS-E M35 (5% Cobalt) / HSS M2 (Caadi) / HSS 4341 ayaa diyaar ah
Wadarta Tirada Qaybaha: 230 Qaybood
Cabbirka kala duwan: 1.0mm ilaa 13.0mm
Tirada Faahfaahsan:
- 1.0mm – 8.5mm: 10 xabbo cabbir kasta (oo ah 0.5mm kordhin)
- 9.0mm – 13.0mm: 5 xabbo cabbir kasta (oo ah 0.5mm kordhin)
- Cabbirrada Gaarka ah: 10 xabbo midkiiba oo ah 3.2mm iyo 4.2mm (Cabbirrada saxda ah ee loogu talagalay in horay loo taabto)
Nooca Shank: Shank Toosan (Silindrical) / Shank Saddex-Fidsan
Xagasha Barta: 118° Barta Caadiga ah / 135° Barta Kala Qaybsan (Is-barbardhig)
Wax-soo-saarka: Si Buuxda Loogu Dhulay (Saxitaan Sare)
Daawaynta Dusha Sare: Dhammaystirka Amber (ee M35) / Madow & Dahab / Dhammaystirka Iftiinka leh / Tin dahaar leh
Kiiska: Sanduuqa Tusmada Birta Buluugga ah ee Xirfadlaha ah oo leh Qalabka Amniga iyo Calaamadaha Cabbirka
Adeegsiga: Ku habboon Birta Dheer ee Gacmaysan, Birta aan Daxalka lahayn, Birta Daawaha leh, Birta la shubay, iyo Qoditaanka Guud ee Alwaaxa ama Balaastikada. -
Dhoolatusyada Xarunta HSS DIN 333 Nooca A & Nooca B - M35 Cobalt & M2, Dhul Buuxa, Iftiin leh & TiN Dahaaran
Faahfaahinta:
Qalabka: HSS M2 / HSS-E M35 (5% Cobalt)
Heerka: DIN 333
Nooca: Nooca A (60° qol jiif oo keliya)
Nooca B (60° chamber + 120° chamber ilaalin ah)
Wax-soo-saarka: 100% Dhul Buuxa
Dhammaadka Dusha Sare: Iftiin (Aan dahaadh lahayn) / TiN dahaadh leh (Dahab)
Nooca Shank: Shank Toosan
Dulqaadka Jirka: H7
Cabbirka cabbirka: 1-10mm
Codsiga: Qoditaanka godka dhexe ee lagu qodo makiinada iyo xarumaha mashiinka; ku habboon birta, birta la shubay, aluminiumka, iyo biraha aan birta ahayn
